Galaxy Projector
Plug the projector into a power outlet. The indicator light will turn red. Press and hold the power button for 3 seconds until the light changes to white, and the projector turns on.
Connect an HDMI cable from your laptop to the projector’s HDMI1 or HDMI2 port.
Use the remote to select the corresponding input source.
On your laptop, toggle the display settings using Fn + F7 or Windows + P, then choose "Duplicate" or "Extend" display.
Use the auto-focus feature for a clear picture. If further adjustment is needed, use the remote’s Focus Plus and Focus Reduction buttons.
For keystone correction, go to Settings > Keystone Correction or use the projector’s auto keystone feature.
The Galaxy Projector supports HDMI, USB, Bluetooth, Wi-Fi, AV, Micro SD, and 3.5mm audio output.
Yes, connect via HDMI, USB-C, or wirelessly using Miracast or Chromecast. Ensure both devices are on the same Wi-Fi network for wireless connections.
Ensure the projector is powered on and the lens cover is removed. Check that the cables are securely connected and the correct input source is selected. Confirm that the connected device is outputting a signal.
Insert the USB drive into the projector’s USB port. Navigate to the USB icon on the home screen using the remote, then select and play your desired file.
Use a soft, dry cloth to clean the exterior and lens. Avoid water or abrasive materials to prevent damage.
Turn off the projector and allow it to cool. Ensure the vents are unobstructed and the air filter is clean. Restart the projector once cooled.
Visit otekworld.com or contact support via email at support@otekworld.com or phone at +91 702702 5357 / +91 702702 5857.